Laval, Laval
- Portable fire extinguishers
- Sprinkler systems
- Fire alarm
- +2 more services
A fire alarm system must be checked every day to make sure it works and that no trouble signal appears on the panel, and certain tests must be done every month. The annual inspection and tests, described in the CAN/ULC-S536 standard, must be done by a specialized firm. This page lists the businesses that offer fire alarm inspection, testing and maintenance in Quebec.
10 businesses found
Map of businesses
The interactive map appears when you interact with the page.
Laval, Laval
Trois-Rivières, Mauricie
Québec, Capitale-Nationale

Previo
Your fire safety plan and your emergency response plan, online and always up to date.
Discover PrevioSaint-Eustache, Laurentides
Montréal, Montréal
Montréal, Montréal
Québec, Capitale-Nationale

Evacuation drill
Planning, timing, debriefing and compliance report.
Plan an evacuation drillQuébec, Capitale-Nationale
Québec, Capitale-Nationale
Québec, Capitale-Nationale

Custom plans
Our team prepares your custom evacuation plans.
See custom evacuation plans
Do it yourself
Evacuation plan, fire department intervention plan or hazardous materials plan, in a free application.
Create my plan for freeAccording to the RBQ inspection register guide, the verifications and tests of fire alarm and detection systems are described in the CAN/ULC-S536 standard, "Standard for Inspection and Testing of Fire Alarm Systems".
| Frequency | What is done | By whom |
|---|---|---|
| Every day | Make sure the system is working and that no trouble signal appears on the fire alarm panel. | Owner or their representative |
| Every month | Certain tests on several components of the system. | Owner, their representative or a specialized firm |
| Every year | More thorough inspections and tests. | Specialized firm |
After the annual inspection, you must obtain a complete inspection report and keep it. The RBQ also states that installation, repair and modification of a fire alarm system must be done by a contractor holding the appropriate licence or licences.
The frequencies shown summarize the inspection register guide (Guide sur la tenue du registre d'inspection) published by the Régie du bâtiment du Québec (RBQ), 2020 edition. Exact requirements depend on the building and its use, and the municipality or the insurer may require more. This page is general information and does not replace professional advice.
Before hiring, ask what report the business will give you after each visit, check that it holds valid liability insurance and, when the work requires a licence from the Régie du bâtiment du Québec (RBQ), that it holds the appropriate licence. Also ask about its experience with your type of building. The RBQ recommends naming the CAN/ULC-S536 standard in the contract. For installation, repair or modification of the system, the contractor must hold the appropriate licence or licences; according to the RBQ, subcategory 13.2, "Entrepreneur en systèmes d'alarme incendie" (fire alarm system contractor), covers installing and verifying these systems.
The directory badges help you narrow things down. The "GCA Approved" badge identifies a responsible contractor with valid liability insurance or an RBQ licence with a valid bond. The "GCA Partner" badge is equivalent to GCA Approved, and the business has also completed training to carry out GCA-approved services.
According to the RBQ guide, you must check every day that the fire alarm system works and that no trouble signal appears on the panel. Certain tests are done every month, and more thorough inspections and tests are done every year by a specialized firm, under the CAN/ULC-S536 standard.
According to the RBQ, the inspection itself does not require the contractor to hold a licence. However, installation, repair and modification of a fire alarm system must be done by a contractor holding the appropriate licence or licences. Licence subcategory 13.2, "Entrepreneur en systèmes d'alarme incendie" (fire alarm system contractor), covers installing and verifying these systems.
The owner or their representative does the daily check: making sure the system works and that no trouble signal appears on the fire alarm panel. Monthly tests can be done by the owner, their representative or a specialized firm. The annual inspection must be done by a specialized firm.
The RBQ recommends naming the CAN/ULC-S536 standard in the contract. After the annual inspection, you must obtain a complete inspection report and keep it, since the building's inspection register contains the results of mandatory verifications and tests.
The "GCA Approved" badge identifies a responsible contractor with valid liability insurance or an RBQ licence with a valid bond. The "GCA Partner" badge is equivalent to GCA Approved, and the business has also completed training to carry out GCA-approved services. Other businesses are simply listed.
Increase your visibility and win contracts. Get free access to the GCA Provider Portal and discover more benefits by becoming a GCA-certified provider.